Rearview Driver Information Camera Replacement (Acadia, Enclave)

WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rearview Driver Information Camera (Acadia, Enclave)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the liftgate applique. Refer to Liftgate Applique Replacement (Acadia) .
1	Double Ended Stud with Collar (Qty: 4) NOTE: Remove in order to remove the isolator and liftgate switch from the applique.
2	Liftgate Applique Isolator NOTE: Carefully release the isolator tab from the liftgate applique.
3	Rearview Driver Information Camera Procedure Disengage the electrical harness from above the rear latch clips and liftgate switch. Disconnect the camera electrical harness connector from the rear license plate lamp harness electrical connector. Ensure the electrical harness is properly positioned prior to installation of the liftgate applique isolator.