Remote Control Door Lock Receiver Scan Tool Information
WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Remote Control Door Lock Receiver Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| Fob 1 Battery | OK | The scan tool displays OK or Low. This is the state of the Fob 1 battery. |
| Fob 1 Function | None | The scan tool displays None, Lock, Dr Door Unlock, All Door Unlock, R Closure Rel., Lt Sliding Ctrl., Rt Sliding Ctrl., Panic, Fuel Door, Power Window, Power Top, Engine Start, Engine Stop, Fob Program, Locate, R Closure Close, R Closure Open, R Closure Stop, Double Lock, R Closure Start or Lt Sliding Stop. This is the state of the Fob 1 command as monitored by the RCDLR. |
| Fob 1 Programmed | Yes | The scan tool displays Yes or No. Yes is displayed if the Fob 1 is programmed into the RCDLR. |
| Fob 2 Battery | OK | The scan tool displays OK or Low. This is the state of the Fob 2 battery. |
| Fob 2 Function | None | The scan tool displays None, Lock, Dr Door Unlock, All Door Unlock, R Closure Rel., Lt Sliding Ctrl., Rt Sliding Ctrl., Panic, Fuel Door, Power Window, Power Top, Engine Start, Engine Stop, Fob Program, Locate, R Closure Close, R Closure Open, R Closure Stop, Double Lock, R Closure Start or Lt Sliding Stop. This is the state of the Fob 2 command as monitored by the RCDLR. |
| Fob 2 Programmed | Yes | The scan tool displays Yes or No. Yes is displayed if the Fob 2 is programmed into the RCDLR. |
| Fob 3 Battery | OK | The scan tool displays OK or Low. This is the state of the Fob 3 battery. |
| Fob 3 Function | None | The scan tool displays None, Lock, Dr Door Unlock, All Door Unlock, R Closure Rel., Lt Sliding Ctrl., Rt Sliding Ctrl., Panic, Fuel Door, Power Window, Power Top, Engine Start, Engine Stop, Fob Program, Locate, R Closure Close, R Closure Open, R Closure Stop, Double Lock, R Closure Start or Lt Sliding Stop. This is the state of the Fob 3 command as monitored by the RCDLR. |
| Fob 3 Programmed | Yes | The scan tool displays Yes or No. Yes is displayed if the Fob 3 is programmed into the RCDLR. |
| Fob 4 Battery | OK | The scan tool displays OK or Low. This is the state of the Fob 4 battery. |
| Fob 4 Function | None | The scan tool displays None, Lock, Dr Door Unlock, All Door Unlock, R Closure Rel., Lt Sliding Ctrl., Rt Sliding Ctrl., Panic, Fuel Door, Power Window, Power Top, Engine Start, Engine Stop, Fob Program, Locate, R Closure Close, R Closure Open, R Closure Stop, Double Lock, R Closure Start or Lt Sliding Stop. This is the state of the Fob 4 command as monitored by the RCDLR. |
| Fob 4 Programmed | Yes | The scan tool displays Yes or No. Yes is displayed if the Fob 4 is programmed into the RCDLR. |
| Front Placard | Varies | This displays Counts. |
| Last Fob Used | Varies | The scan tool displays None, Fob 1, Fob 2, Fob 3, Fob 4 or Fob 5. This was the last Fob used, as monitored by the RCDLR. |
| LF Pressure Sensor Mode | Varies | The scan tool displays Learn, Re-measure, Rolling, Entering Off or Exiting Off. This is the state of the left front pressure sensor. |
| LF Pressure Status | Normal | The scan tool displays Unknown, Normal, Low, Flat or High. This is the state of the left front tire pressure. |
| LF Tire Press. Sensor Status | Normal | The scan tool displays Normal or Failed. This is the state of the left front tire pressure sensor. |
| LF Tire Pressure | Varies | This displays kPa (psi). This is the amount of pressure in the left front tire. |
| LF Tire Pressure Sensor Battery Status | OK | The scan tool displays OK or Low. This is the state of the battery in the left front tire pressure sensor. |
| LR Pressure Sensor Mode | Varies | The scan tool displays Learn, Re-measure, Rolling, Entering Off or Exiting Off. This is the state of the left rear pressure sensor. |
| LR Pressure Status | Normal | The scan tool displays Unknown, Normal, Low, Flat or High. This is the state of the left rear tire pressure. |
| LR Tire Press. Sensor Status | Normal | The scan tool displays Normal or Failed. This is the state of the left rear tire pressure sensor. |
| LR Tire Pressure | Varies | This displays kPa (psi). This is the amount of pressure in the left rear tire. |
| LR Tire Pressure Sensor Battery Status | OK | The scan tool displays OK or Low. This is the state of the battery in the left rear tire pressure sensor. |
| Rear Placard | Varies | This displays Counts. |
| RF Pressure Sensor Mode | Varies | The scan tool displays Learn, Re-measure, Rolling, Entering Off or Exiting Off. This is the state of the right front pressure sensor. |
| RF Pressure Status | Normal | The scan tool displays Unknown, Normal, Low, Flat or High. This is the state of the right front tire pressure. |
| RF Tire Press. Sensor Status | Normal | The scan tool displays Normal or Failed. This is the state of the right front tire pressure sensor. |
| RF Tire Pressure | Varies | This displays kPa (psi). This is the amount of pressure in the right front tire. |
| RF Tire Pressure Sensor Battery Status | OK | The scan tool displays OK or Low. This is the state of the battery in the right front tire pressure sensor. |
| RR Pressure Sensor Mode | Varies | The scan tool displays Learn, Re-measure, Rolling, Entering Off or Exiting Off. This is the state of the right rear pressure sensor. |
| RR Pressure Status | Normal | The scan tool displays Unknown, Normal, Low, Flat or High. This is the state of the right rear tire pressure. |
| RR Tire Press. Sensor Status | Normal | The scan tool displays Normal or Failed. This is the state of the right rear tire pressure sensor. |
| RR Tire Pressure | Varies | This displays kPa (psi). This is the amount of pressure in the right rear tire. |
| RR Tire Pressure Sensor Battery Status | OK | The scan tool displays OK or Low. This is the state of the battery in the right rear tire pressure sensor. |
| Selected Front Tire Type | Varies | The scan tool displays N/A, P-Metric (S), P-Metric (X), Load Range C, Load Range D or Load Range E. This is the type of front tires used on the vehicle. |
| Selected Rear Tire Type | Varies | The scan tool displays N/A, P-Metric (S), P-Metric (X), Load Range C, Load Range D or Load Range E. This is the type of rear tires used on the vehicle. |
| TPM Indicator/Message | Off | The scan tool displays On or Off. This is the state of the TPM indicator. |
| TPM System Enabled | Yes | The scan tool displays Yes or No. Yes is displayed if the TPM system is enabled. |
Remote Control Door Lock Receiver Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Key Fob Button Test | The RCDLR monitors the incoming RF communications to ensure all keyless entry transmitter functions are operating properly. |