LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Enclave Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Programming And Setup - All Systems) >> Repair Instructions >> Front and Rear Parking Assist Control Module Programming and Setup >> Reprogram Front and Rear Parking Assist Control Module

Reprogram Front and Rear Parking Assist Control Module

WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Do not reprogram the K41 Front and Rear Parking Assist Control Module, unless directed by a service procedure, or a service bulletin.

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) 
  2. Perform the SPS function K41 Front and Rear Parking Assist Control Module Programming and follow the on-screen instructions.
  3. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals