LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Enclave Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Wiper System And Washer System) >> Repair Instructions >> Windshield Wiper Motor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Windshield Wiper Motor
    GM4292983Courtesy of GENERAL MOTORS COMPANY
  1. Install Windshield Wiper Motor

    Install Windshield Wiper Transmission Bolt and tighten to 15 N.m (11 lb ft)

    2. Fig 2: Lower Transmission Arm And Crank Arm
    GM4293062Courtesy of GENERAL MOTORS COMPANY
  2. Use the J-39529  Wiper Linkage Installer to install the lower transmission arm to the crank arm.
    3. Fig 3: Upper Transmission Arm And Crank Arm
    GM4293064Courtesy of GENERAL MOTORS COMPANY
  3. Use the J-39529  Wiper Linkage Installer to install the upper transmission arm to the crank arm.
    4. Fig 4: Transmission Arms And Crank Arm
    GM4293096Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Verify that the alignment of all 3 arms are in the electrically Park position.

  4. Align both transmission arms to the crank arm so that they are in a straight arm.
    5. Fig 5: Windshield Wiper Transmission
    GM4281971Courtesy of GENERAL MOTORS COMPANY
  5. Install Windshield Wiper Transmission - Windshield Wiper Transmission Replacement 
  6. Verify proper windshield wiper motor operation.
scientia non olet · About LEMON Manuals