TPMS Reset Procedures: Notes
NOTE:
If a tire pressure sensor or the RCDLR is replaced, or if wheels have been rotated, tire pressure sensors must be relearned. The relearn procedure can be performed using either the keyless entry system or a scan tool. See Using Keyless Entry System or DIC or Using Scan Tool
.
When a low tire pressure condition is detected, the TPMS illuminates the low tire pressure warning light located on the instrument cluster. A message to check the pressure in a specific tire will be displayed in the Driver Information Center (DIC). Both the indicator icon and DIC message can be cleared by adjusting the tire pressures to the recommended kPa/psi and driving the vehicle above 25 mph (40 km/h) for at least 2 minutes.