LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Enclave Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls And Fuel - 3.6L (LFY) - Repair Instructions >> Repair Instructions >> Fuel Pump Power Control Module Replacement (AWD)

Fuel Pump Power Control Module Replacement (AWD)

GM4742912
Callout Component Name
Preliminary Procedure 
Raise and support the vehicle. Lifting and Jacking the Vehicle
1 Fuel Pump Power Control Module Fastener [2x]
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Fuel Pump Power Control Module

Procedure

  1. Disconnect the electrical connector.
  2. If replacing, reprogram the module. Control Module References