LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Cascada Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Airbag Steering Wheel Module Replacement >> Removal Procedure

Removal Procedure

WARNING:

Refer to SIR Inflator Module Handling and Storage Warning .

WARNING:

Refer to SIR Warning .

  1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
  2. GM2194050
    NOTE:

    Produce a special tool for airbag removal, the tool can be reused.

    Use a screwdriver or equivalent tool with total length of (b) 180 mm (7.1 in) and a diameter of 3 - 4 mm (0.1 - 0.15 in). Bend the tip (a) at 30 mm (1.2 in) by approx. 30 degrees.

  3. Lower the steering column and move to the maximum rear end position.
  4. Turn the steering wheel to a 3 o'clock and 9 o'clock position so that the holes are at the top.
  5. GM2342741

    Insert the screw driver (1) through both access openings and push the spring fastener (2) inward to release the steering wheel inflator from the steering wheel.

  6. GM2577133

    Open secondary locking (2).

  7. Disconnect the electrical connectors (1).
  8. Remove the steering wheel inflatable restraint module (2).
scientia non olet · About LEMON Manuals