LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Cascada Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive Cable Junction Block Terminal Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. GM2595433Courtesy of GENERAL MOTORS COMPANY

    Unlock the retaining tab (2) on the battery fuse box cover.

    3. NOTE:

    Pull the battery fuse box housing. DO NOT pull the flap.

  3. Open the battery fuse box flap (1).
  4. Unlock the retaining tab (3) and open the battery fuse box cover.
  5. GM2694017Courtesy of GENERAL MOTORS COMPANY

    Remove the battery positive cable to starter nut (2).

  6. Remove the battery positive cable to starter cable (1) from the battery.
  7. Remove the 2 battery positive plate nuts (4).
  8. Remove the starter fuse (3).
  9. Remove the battery positive plate (5).
  10. Loosen the battery positive cable junction block terminal nut.
  11. Remove the battery positive cable junction block terminal (6) from the battery positive pole.
scientia non olet · About LEMON Manuals