Circuit/System Testing
- Ignition OFF, disconnect the harness connector at the appropriate P19 Speaker. Ignition ON, A11 Radio ON, mute OFF.
- Test for 5 - 7 V between each audio signal circuit terminal 1 and terminal 2 and ground.
- Ignition OFF, disconnect the X1 harness connector at the A11 Radio.
- Test for infinite resistance between the signal circuit and ground.
- If less than infinite resistance, repair the short to ground on the circuit.
- Test for less than 2 Ω in the signal circuit end to end.
- If 2 Ω or greater, repair the open/high resistance in the circuit.
- If less than 2 Ω, replace the A11 Radio.
- Ignition OFF, disconnect the X1 harness connector at the A11 Radio. Ignition ON.
- Test for less than 1 V between the signal circuit and ground.
- If 1 V or greater, repair the short to voltage on the circuit.
- If less than 1 V, replace the A11 Radio.
- Test or replace the P19 Speaker.