Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bolt - J64 | |
|
40 N.m (30 lb ft) |
|
90 degrees |
| Brake Caliper Bracket Bolt - Front | |
|
150 N.m (111 lb ft) |
|
45 degrees |
|
15 degrees |
| Brake Caliper Bracket Bolt - Rear | |
|
100 N.m (74 lb ft) |
|
60 degrees |
| Brake Caliper Guide Pin Bolt - Front and Rear | 27 N.m (20 lb ft) |
| Brake Hose Fitting Bolt - Front and Rear | 40 N.m (30 lb ft) |
| Brake Rotor Bolt - Front | 7 N.m (62 lb in) |
| Brake Rotor Bolt - Rear | 10 N.m (89 lb in) |