Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Frame-to-Body Reinforcement Fastener | |
|
60 N.m (44 lb ft) |
|
30 Degrees |
| Rear Support Reinforcement Arm Bolts (GNE) | |
|
150 N.m (111 lb ft) |
|
30 Degrees |
|
15 Degrees |
| Rear Support-to-Body Fasteners (GNE) | |
|
90 N.m (66 lb ft) |
|
180 Degrees |
|
15 Degrees |
| Rear Support-to-Body Fasteners (GNC) | |
|
90 N.m (66 lb ft) |
|
120 Degrees |
|
15 Degrees |
| Steering Gear Fasteners | |
|
90 N.m (66 lb ft) |
|
150 Degrees |
|
15 Degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Drivetrain and Front Suspension Frame Transmission Protector Fasteners (AWD) | 35 N.m (26 lb ft) |
| Frame-to-Body Fasteners | 160 N.m (118 lb ft) |
| Front Compartment Splash Shield | 3 N.m (27 lb in) |
| Front Transmission Mount Through Bolt | 100 N.m (74 lb ft) |
| Front Wheelhouse Liner Screw - Front | 3 N.m (27 lb in) |
| Front Wheelhouse Rear Liner Nut | 3 N.m (27 lb in) |
| Front Wheelhouse Rear Liner Screw | 3 N.m (27 lb in) |
| Rear Transmission Mount Through Bolt | 100 N.m (74 lb ft) |
| Rear Suspension Frame Bolt | 100 N.m (74 lb ft) |
| Rear Wheelhouse Panel Liner Plastic Nut | 2.5 N.m (22 lb in) |
| Rear Wheelhouse Panel Liner Screw | 3 N.m (27 lb in) |
| Side Member Reinforcement Fasteners (NJ2) | 22 N.m (16 lb ft) |
| Underbody Front Air Deflector Fastener | 2.5 N.m (22 lb in) |
| Underbody Rear Air Deflector Fastener | 3 N.m (27 lb in) |