LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Regal Base, 2.4L Eng VIN K, Gas >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.4L (Lea) - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement - Intake >> Removal Procedure

Removal Procedure

  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
    3. Fig 1: Intake Camshaft Position Sensor And Connector
    GM1815154Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the engine wiring harness electrical connector (1) from the intake camshaft position (CMP) sensor.
    4. Fig 2: CMP Sensor & Bolt
    GM1578483Courtesy of GENERAL MOTORS COMPANY
  4. Remove the intake CMP sensor bolt.
  5. Remove the intake CMP sensor.
scientia non olet · About LEMON Manuals