Installation Procedure

Fig 1: Battery Sensor

Courtesy of GENERAL MOTORS COMPANY

Battery Negative Cable 4- Install
Place a suitable open ended wrench on the battery sensor terminal, to prevent damage to the battery sensor. 2

CAUTION:

Battery Negative Cable Nut 1 - Install and tighten 16 N.m (12 lb ft)
Battery Negative Cable Frame Ground Fastener 3 - Install and tighten 22 N.m (16 lb ft)

Fig 2: Rear Compartment Side Trim - Left Side (Without HP4)

Courtesy of GENERAL MOTORS COMPANY

Rear Compartment Side Trim Panel 2 - Install - Rear Compartment Side Trim Replacement - Left Side (With LHN)Rear Compartment Side Trim Replacement - Left Side (With LGX)