LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Envision Premium >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Repair Instructions >> Body Side Window Replacement >> Removal Procedure

Removal Procedure

    WARNING:

    Glass and Sheet Metal Handling Warning .

    WARNING:

    Cracked Window Warning .

    NOTE:

    Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.

  1. Open the liftgate.
  2. Remove Quarter Window Trim Finish Panel Replacement
    3. WARNING:

    If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause personal injury.

  3. Cover the seats and the carpeting to protect from broken glass.
    4. NOTE:

    Keep the cutting edge of the tool against the body side rear window from inside the vehicle. This will allow the urethane adhesive to be separated from the window.

  4. Use BO-39032  stationary glass removal tool, or equivalent in order to remove the body side stationary window.
    • Leave a base of urethane on the pinchweld flange.
    • The only suitable lubrication is clear water.
    5. Fig 1: Window
    GM3819040Courtesy of GENERAL MOTORS COMPANY
  5. Remove the locator pins (1) and body side window (2) from the vehicle.
scientia non olet · About LEMON Manuals