Removal Procedure
WARNING:
Refer to Brake Dust Warning .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
- Remove Rear Wheel Speed Sensor Bolt (1)
- Release Rear Wheel Speed Sensor Retainer (1)
- Release Rear Wheel Speed Sensor Retainers (1) (Qty: 2)
- Lower the rear suspension cradle approximately 25 mm (1 in). Refer to Rear Suspension Cradle Replacement
- Disconnect Rear Wheel Speed Sensor Electrical Connector (1)
- Remove Rear Wheel Speed Sensor