LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Battery, Charging System And Starting System >> Repair Instructions >> Engine Wiring Harness Junction Block Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuse Block
    GM3910782Courtesy of GENERAL MOTORS COMPANY
  1. Position the fuse block (1) to the vehicle and push down until the retainer tabs lock into place.
    2. Fig 2: Fuse Block Bolts
    GM3910778Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the fuse block bolts (1). and tighten to 7 N.m (62 lb in)
  3. Install Battery Negative Cable Disconnection and Connection 
  4. Install Front Compartment Fuse Block Cover Replacement
scientia non olet · About LEMON Manuals