LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Diagnostic Information and Procedures >> Rear Window Defogger Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Operate the component:Rear Defogger Switch - Pressed

    Verify the scan tool parameter:Rear Defogger Switch=Off & On

    • If not the specified state 

      Replace the component:A26 HVAC Controls

    • If the specified state 
  3. Perform the scan tool control function:Rear Defogger - On and Off

    Verify the component turns On and Off:E18 Rear Defogger Grid

    • If the component does not turn On and Off 

      Refer to: Circuit/System Testing

    • If the component turns On and Off 
  4. Operate the component:Rear Defogger Switch - Pressed
  5. Verify the component turns On and Off:Rear Defogger Indicator
    • If the component does not turn On and Off 

      Replace the component:A26 HVAC Controls

    • If the component turns On and Off 
  6. All OK.