Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Perform the scan tool control function:Driver Window Motor - Up & Down
Verify the component works as specified:M74D Window Motor - Driver =Up & Down
- If not the specified state
Test or replace the component:M74D Window Motor - Driver
- If the specified state
- If not the specified state
- Perform the scan tool control function:Driver Window Motor - Down
- Operate the component:S79D Window Switch - Driver - Pulled=Up & Release
Verify the component works as specified:M74D Window Motor - Driver =Express Up
- If not the specified state
Use the following procedure: Window Motor Programming - Express Function
- If the specified state
- If not the specified state
- Ignition/Vehicle & All vehicle systems - Off - For greater than 2 min
- Ignition - On / Vehicle - In Service Mode
- Perform the scan tool control function:Driver Window Motor - Down
- Operate the component:S79D Window Switch - Driver - Pulled=Up & Release
Verify the component works as specified:M74D Window Motor - Driver =Express Up
- If not the specified state
Test or replace the component:M74D Window Motor - Driver
- If the specified state
- If not the specified state
- All OK.