LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System And Pedestrian Protection System >> Repair Instructions >> Advanced Parking Assist Alarm Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Advance Parking Assist Alarm Sensor
    GM3905140Courtesy of GENERAL MOTORS COMPANY
  1. Remove Front Bumper Fascia. Refer to Front Bumper Fascia Replacement
  2. Disconnect the electrical connector.
  3. Lift the locking tabs on the housing and remove the advance parking assist alarm sensor (1).
scientia non olet · About LEMON Manuals