LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Power Outlets >> Diagnostic Information and Procedures >> DTC B151E: Accessory DC/AC Power Inverter Module Relay Circuit >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON/Vehicle in Service Mode.
  2. Connect an AC powered device to the X81 Accessory Power Receptacle - 110V AC.
  3. Verify the device is powered.
    • If the device is not powered 

      Refer to Circuit/System Testing.

    • If the device is powered 
  4. All OK.