LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Encore Base >> Repair and Diagnosis >> Transmission >> Power Transfer Unit/Transfer Case - AAM >> Repair Instructions - On Vehicle >> Transfer Case Adapter Bushing Replacement >> Removal Procedure

Removal Procedure

  1. Remove the transfer case. Refer to Transfer Case Replacement .
    2. Fig 1: Transfer Case Adapter Seal
    GM2759854Courtesy of GENERAL MOTORS COMPANY
  2. Remove and DISCARD the transfer case adapter seal from the transmission adapter.
    3. Fig 2: Transfer Case Adapter Bolts
    GM2759903Courtesy of GENERAL MOTORS COMPANY
  3. Remove and DISCARD the five transmission adapter fasteners (1).
    4. Fig 3: Rear Transmission Mount Through Bolt And Transfer Case Adapter
    GM2759935Courtesy of GENERAL MOTORS COMPANY
  4. Remove and DISCARD the rear transmission mount through bolt (1).
  5. Remove the transmission adapter (2) from the transmission.
  6. Inspect the rear mount bushing the transmission adapter for wear or damage. Refer to Transfer Case Adapter Disassemble .
scientia non olet · About LEMON Manuals