Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Equalizer Beam Center Link Bolt and Nut | |
|
70 N.m (52 lb ft) |
|
120-135 degrees |
| Equalizer Beam Link Bolt and Nut | |
|
40 N.m (30 lb ft) |
|
45-60 degrees |
| Rear Axle Bracket Bolt | |
|
90 N.m (66 lb ft) |
|
45-60 degrees |
| Rear Suspension Trailing Arm Nut | |
|
70 N.m (52 lb ft) |
|
120-135 degrees |
| Shock Bolt Lower | |
|
150 N.m (111 lb ft) |
|
60-75 degrees |
| Wheel Bearing/Hub Assembly Mounting Bolts | |
|
50 N.m (37 lb ft) |
|
30-45 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Equalizer Beam Link Bolt | 160 N.m (118 lb ft) |
| Equalizer Beam Support Bolt | 100 N.m (74 lb ft) |
| Rear Parking Brake Cable Bracket Bolts | 10 N.m (89 lb in) |
| Rear Shock Absorber Upper Bolt | 100 N.m (74 lb ft) |
| Wheel Speed Sensor Bolt | 6 N.m (53 lb in) |