LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Cascada Base >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Intermediate Steering Shaft Replacement >> Installation Procedure

Installation Procedure

  1. GM2027663

    Install the intermediate steering shaft (1).

  2. GM2192089

    Push upper universal joint onto steering column carefully as described in the above note.

  3. Push down lower universal joint (1) onto steering gear pinion (3).
  4. GM2027664
    NOTE:

    The recess (2) of the fine toothing in the universal joint have to align precisely with the recess (1) of the fine toothing on the steering pinion. The bore in the universal joint has to align with the groove on the steering pinion (3).

    Push universal joint onto steering pinion carefully as described in the above note.

  5. GM2027661
    CAUTION:

    Refer to Fastener Caution .

    Install the 2 NEW intermediate steering shaft bolts (1) and tighten to 34 N.m (25 lb ft).

  6. Center the steering angle sensor. Refer to Steering Wheel Angle Sensor Centering .
scientia non olet · About LEMON Manuals