Sunroof Module Assembly Replacement

WARNING: This page is about a different car, the 2015 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sunroof Module Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the headlining trim panel. Refer to Headlining Trim Panel Replacement (with Sunroof)Headlining Trim Panel Replacement (without Sunroof) . Disconnect the front and rear drain hose.
1	Sunroof Module Bolt (Qty: 12) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Sunroof Module Assembly Procedure Disconnect the electrical connector. A new sunroof module assembly does not include the sunroof window, the motor, the sunshade, or the finishing lace as components. You must install the old components to the new sunroof module assembly.

Callout

Component Name

Preliminary Procedures

Remove the headlining trim panel. Refer to Headlining Trim Panel Replacement (with Sunroof)Headlining Trim Panel Replacement (without Sunroof) .
Disconnect the front and rear drain hose.

Sunroof Module Bolt (Qty: 12)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Sunroof Module Assembly

Procedure

Disconnect the electrical connector.
A new sunroof module assembly does not include the sunroof window, the motor, the sunshade, or the finishing lace as components. You must install the old components to the new sunroof module assembly.