LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Verano Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Object Detection System - Park Assist System) >> Diagnostic Information and Procedures >> Parking Assist System Malfunction >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2015 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.

Manual Transmission

  1. Engine running, transmission in REVERSE.
  2. Verify the scan tool Calculated Transmission Range parameter is Reverse.
    • If parameter is Reverse 
  3. Verify the scan tool Park Assist System Status parameter displays Enable.
      NOTE:

      After completing the next step the vehicle might need to be driven in the forward direction at speed greater than 40 km/h (25 mph).

    • If status is not Enable 

      Refer to Diagnostic Aids and the scan tool Park Assist Disable History parameters to determine the cause of the inhibit.

    • If status is Enable 
  4. Replace the K41R Rear Parking Assist Control Module.

Automatic Transmission

  1. Engine running, transmission in REVERSE.
  2. Verify the scan tool Park Assist System Status parameter displays Enable.
      NOTE:

      After completing the next step the vehicle might need to be driven in the forward direction at speed greater than 40 km/h (25 mph).

    • If status is not Enable 

      Refer to Diagnostic Aids and the scan tool Park Assist Disable History parameters to determine the cause of the inhibit.

    • If status is Enable 
  3. Replace the K41R Rear Parking Assist Control Module.