Installation Procedure

WARNING: This page is about a different car, the 2015 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Battery Negative Cable & Current Sensor

Courtesy of GENERAL MOTORS COMPANY

Install the current sensor (2) at the battery negative cable (1).

Fig 2: Wiring Harness Current Sensor Plug

Courtesy of GENERAL MOTORS COMPANY

Install the current sensor (5) at the battery tray.
Connect the wiring harness current sensor plug (4).

Fig 3: Battery Negative Cable And Battery Ground Cable Nut

Courtesy of GENERAL MOTORS COMPANY

Install the negative cable (2).

CAUTION:

Refer to Fastener Caution .

Install the negative cable nut (1) and tighten to 9 N.m (80 lb in).
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .