LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Verano Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Wiring Systems And Power Management - Component Connector End Views - Heated Seat Control Module (KA1) X2 To Yaw And Lateral Accelerometer Sensor) >> Component Connector End Views >> Multifunction Intake Air Sensor

Multifunction Intake Air Sensor

WARNING: This page is about a different car, the 2016 Chevrolet Impala Limited. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Multifunction Intake Air Sensor Connector End View
GM2581486Courtesy of GENERAL MOTORS COMPANY
Multifunction Intake Air Sensor

Pin Wire Circuit Function
1 0.35 L-BU 6289 Induction Air Temperature Sensor Signal
2 0.35 GY 3201 5 Volt Reference 1
3 0.35 TN 2760 Low Reference
4 0.35 YE/WH 3200 Throttle Inlet Absolute Pressure Sensor Signal
5 0.5 PK/BK 5294 Powertrain Main Relay Fused Supply (5)
6 0.35 YE 492 Mass Air Flow Sensor Signal
7 0.35 BK/WH 451 Ground
8 0.35 PU 4008 Humidity Sensor Signal
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 13774439
  • Service Connector: 13583440
  • Description: 8-Way F 064 Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: Pins 1-4, 6-8 - 13575864
  • Terminated Lead: Pin 5 - 13575865
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03GF-M064/27
  • Core/Insulation Crimp: P/P
scientia non olet · About LEMON Manuals