LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Verano Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Wiring Systems And Power Management - Component Connector End Views - A/C Compressor Clutch To Heated Seat Control Module (KA1) X1) >> Component Connector End Views >> Fuel Pump and Sender Assembly

Fuel Pump and Sender Assembly

WARNING: This page is about a different car, the 2016 Chevrolet Impala Limited. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Pump And Sender Assembly Connector End View
GM684908Courtesy of GENERAL MOTORS COMPANY
Fuel Pump and Sender Assembly

Pin Wire Circuit Function
A 2 PK 1580 Fuel Pump Ground
B 0.5 PU 30 Fuel Level Sensor Signal
C 0.35 BK/WH 510 Low Reference
D 2 GY 120 Fuel Pump Supply Voltage
Connector Part Information
  • Harness Type: Rear Chassis
  • OEM Connector: 15326631
  • Service Connector: 13580864
  • Description: 4-Way F GT 280 5.8 Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: 13575405
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304719/19
  • Core/Insulation Crimp: 2/5
scientia non olet · About LEMON Manuals