LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Verano Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Wiring Systems And Power Management - Component Connector End Views - A/C Compressor Clutch To Heated Seat Control Module (KA1) X1) >> Component Connector End Views >> Brake Pedal Position (BPP) Sensor

Brake Pedal Position (BPP) Sensor

WARNING: This page is about a different car, the 2016 Chevrolet Impala Limited. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Brake Pedal Position (BPP) Sensor Connector End View
GM1862240Courtesy of GENERAL MOTORS COMPANY
Brake Pedal Position (BPP) Sensor

Pin Wire Circuit Function
1 0.35 TN 552 Low Reference
2 0.35 GY 598 5-Volt Reference
3 0.35 L-GN 526 Stop Lamp Switch Signal
4 0.5 BN 5361 Brake Apply Sensor Signal
5 0.5 BN 5360 Low Reference
6 0.5 WH 5359 Brake Apply Sensor Supply Voltage
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 13595476
  • Service Connector: 19167753
  • Description: 6-Way F AIT II Series (BK)
Terminal Part Information
  • Terminated Lead: Pins 1-3 - 13327119
  • Terminated Lead: Pins 4-6 -13575867
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P
scientia non olet · About LEMON Manuals