LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Verano Base, Gas >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L (Lea) - DTC P0335 To DTC P2635 And Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC P1400: Cold Start Emission Reduction Control System >> Circuit/System Verification

Circuit/System Verification

  1. Allow the engine to cool until the catalyst temperature is less than 300°C (572°F) and the engine coolant is between -12 to +56°C (10-133°F).
  2. Idle the engine for greater than 2 minutes.
  3. Observe the scan tool DTC information. DTC P1400 should not set.
  4. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals