LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Verano Base, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Wiring Systems And Power Management - Component Connector End Views - A/C Compressor Clutch To Heated Seat Control Module (KA1) X1) >> Component Connector End Views >> Camshaft Position (CMP) Sensor - Bank 1 Exhaust

Camshaft Position (CMP) Sensor - Bank 1 Exhaust

WARNING: This page is about a different car, the 2016 Chevrolet Impala Limited. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position (CMP) Sensor - Bank 1 Exhaust Connector End View
GM1914850Courtesy of GENERAL MOTORS COMPANY
Camshaft Position (CMP) Sensor - Bank 1 Exhaust

Pin Wire Circuit Function
1 0.5 GY 5296 Low Reference
2 0.5 D-GN 5273 Camshaft Position Sensor - Exhaust Bank 1 Signal
3 0.5 YE/BK 5297 5-Volt 1 Reference
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 15345983
  • Service Connector: 13580231
  • Description: 3-Way F 2.8 Junior Power Timer Series, Sealed (GY)
Terminal Part Information
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: J-38125-561
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Release Tool: Not Available
  • Diagnostic Test Probe: Not Available
scientia non olet · About LEMON Manuals