| Front Brakes |
- Brake Rotor Diameter (J60)
|
296.0 mm |
11.65 in |
- Brake Rotor Diameter (J61)
|
321.0 mm |
12.63 in |
- Brake Rotor Diameter (J64)
|
355.0 mm |
13.976 in |
- Brake Rotor Discard Thickness* (J60, J61)
|
27.0 mm |
1.07 in |
- Brake Rotor Discard Thickness* (J64)
|
30.0 mm |
1.181 in |
- Brake Rotor Maximum Allowable Assembled Lateral Runout
|
0.05 mm |
0.002 in |
- Brake Rotor Maximum Allowable Scoring
|
1.50 mm |
0.059 in |
- Brake Rotor Maximum Allowable Thickness Variation
|
0.006 mm |
0.00024 in |
- Brake Rotor Thickness New (J60, J61)
|
30.0 mm |
1.18 in |
- Brake Rotor Thickness New (J64)
|
32.0 mm |
1.26 in |
| Rear Brakes |
- Brake Rotor Diameter (J60)
|
292.0 mm |
11.50 in |
- Brake Rotor Diameter (J61, J64)
|
315.0 mm |
12.40 in |
- Brake Rotor Discard Thickness* (J60)
|
10.00 mm |
0.395 in |
- Brake Rotor Discard Thickness* (J61, J64)
|
21.00 mm |
0.827 in |
- Brake Rotor Maximum Allowable Assembled Lateral Runout
|
0.05 mm |
0.002 in |
- Brake Rotor Maximum Allowable Scoring
|
1.50 mm |
0.059 in |
- Brake Rotor Maximum Allowable Thickness Variation
|
0.006 mm |
0.00024 in |
- Brake Rotor Thickness- New (J60)
|
12 mm |
0.472 in |
- Brake Rotor Thickness- New (J61, J64)
|
23.0 mm |
0.905 in |
| *All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the discard thickness specification. |