Removal Procedure
- Remove as much power steering fluid from the power steering fluid reservoir as possible.
- Remove Drive Belt Drive Belt Replacement (Without EPS) , or DRIVE BELT REPLACEMENT (WITH EPS)
- Remove the right front tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove Power Steering Gear Inlet Hose Bolt (1)
- Remove Power Steering Gear Inlet Hose Seal (2)
DISCARD the seals.
- Disengage Power Steering Fluid Reservoir Outlet Hose Clamp (1)
- Remove Power Steering Fluid Reservoir Outlet Hose (2) @Power Steering Pump
- Remove Power Steering Pump Bolt (1)
- Remove the power steering pump (2) from the vehicle.
- Transfer components as necessary.
NOTE:
Access the power steering pump bolts through the holes in the power steering pump pulley.