Radio Replacement

Preliminary Procedure

1. Remove the body hinge pillar garnish molding - right. Refer to Body Hinge Pillar Garnish Molding Replacement .
2. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
3. Remove the Radio bracket fasteners. Refer to Radio Bracket Replacement .

Procedure

1. Reposition the carpet as needed to allow enough clearance for the module to be removed.
   NOTE:

   Compressing the dash panel inner insulator will be necessary to aid in the removal.

2. Disconnect the electrical connections.
3. Slide module downward to release from bracket.
4. Refer to Control Module References for programming and setup information.