LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Envision >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> OnStar Button LED Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the green LED is off with the ignition ON and the LED does not function when commanded with the scan tool, contact the OnStar Center to confirm the vehicle has a current subscription.

  1. Ignition ON.
  2. Verify no DTC are set.
    • If no DTC are set 
  3. Verify that the green LED turns ON and OFF when commanding the Green Indicator ON and OFF with a scan tool.
    • If the green LED turns ON and OFF 
  4. Verify that the red LED turns ON and OFF when commanding the Red Indicator ON and OFF with a scan tool.
    • If the red LED turns ON and OFF 
  5. All OK.