LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Envision >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Programming And Setup - All Systems) >> Repair Instructions >> HVAC System Control Module Programming and Setup >> Replace and Program Control Module

Replace and Program Control Module

WARNING: This page is about a different car, the 2015 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement control module, perform the following procedure:

  1. Install EL-49642  SPS Programming Support Tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K33 HVAC Control Module - Programming - Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select K33 HVAC Control Module - Programming - Setup and follow the on-screen instructions.
  5. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals