Removal Procedure
- Fuel Pressure Relief - Relieve the fuel system pressure.NOTE:
It is not necessary to completely remove the intake manifold to gain access to the fuel injection fuel rail fuel pressure sensor.
- Intake Manifold Replacement - Reposition
- Fuel Injection Fuel Rail Noise Shield Replacement - Reposition
- Electrical Connector (1) @Fuel Injection Fuel Rail Fuel Pressure Sensor (2) - Disconnect CAUTION:
Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .
NOTE:Do NOT apply force to the plastic housing of the fuel injection rail fuel pressure sensor. ONLY apply force to the attached hexagon.
Some fuel may leak from the fuel rail fuel pressure sensor orifice after the sensor is removed. Dry the area around this orifice after the removal of the sensor using a lint free cloth.
After removal, the area around the fuel rail fuel pressure sensor sealing surface should be inspected. The surface should be free of fuel, dirt, debris, and burrs.
- Fuel Injection Fuel Rail Fuel Pressure Sensor (2) @Fuel Injection Fuel Rail (3) - Remove and DISCARD