LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Envision >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Battery Distribution Engine Compartment Fuse Block Replacement >> Removal Procedure

Removal Procedure

  1. Battery Negative Cable Disconnection and Connection »Disconnect
    2. Fig 1: Generator Cable Nut
    GM3910758Courtesy of GENERAL MOTORS COMPANY
  2. Open the fuse block cover.
  3. Remove the starter and generator cable nut (1).
  4. Reposition the starter and generator cable.
    5. Fig 2: Positive Battery Cable Nuts
    GM3910773Courtesy of GENERAL MOTORS COMPANY
  5. Remove the positive battery cable nut (1) and remove the small wire .
  6. Remove the positive battery cable nut (2) and remove cable.
    7. Fig 3: Battery Positive Junction Block Cable Nut
    GM3910775Courtesy of GENERAL MOTORS COMPANY
  7. Remove the battery positive junction block cable nut (1).
  8. Remove the fuse block wiring harness terminal nuts (2).
  9. Reposition the wiring harness terminals.
    10. Fig 4: Fuse Block Tabs
    GM3910776Courtesy of GENERAL MOTORS COMPANY
  10. Unclip the fuse block tabs (1) and remove from the battery.
scientia non olet · About LEMON Manuals