LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Encore Base, FWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Gear Inlet Pipe/Hose Replacement >> Removal Procedure

Removal Procedure

  1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
    2. Fig 1: Power Steering Gear Inlet Hose And Seal
    GM2808012Courtesy of GENERAL MOTORS COMPANY
  2. Power Steering Gear Inlet Hose 1 @Power Steering Pump - Remove
  3. Power Steering Gear Inlet Hose Seal 2 - Remove

    DISCARD the seal.

    4. Fig 2: Steering Gear Inlet Hose
    GM2808013Courtesy of GENERAL MOTORS COMPANY
  4. Remove the power steering gear inlet hose bracket bolt (1) and separate the power steering gear inlet hose (2) from the engine.
  5. Raise and support the vehicle. Lifting and Jacking the Vehicle
    6. Fig 3: Power Steering Gear Inlet Hose And Bracket
    GM2808014Courtesy of GENERAL MOTORS COMPANY
  6. Remove the power steering gear inlet hose bracket bolt (1) and the plastic push pin (2) and separate the power steering gear inlet hose (3) from the drivetrain and front suspension frame.
    7. Fig 4: Power Steering Gear Inlet And Outlet Hoses
    GM2808015Courtesy of GENERAL MOTORS COMPANY
  7. Power Steering Gear Inlet and Outlet Hose Bolt 1 - Remove
  8. Power Steering Gear Inlet Hose 2 @Steering Gear - Remove
  9. Power Steering Gear Outlet Hose 3 @Steering Gear - Remove
  10. Power Steering Gear Inlet Hose Seal 4 - Remove

    DISCARD the seal.

  11. Power Steering Gear Outlet Hose Seal 4 - Remove

    DISCARD the seal.

  12. Remove the power steering gear inlet hose (2) from the vehicle.
scientia non olet · About LEMON Manuals