Inside Rearview Mirror Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inside Rearview Mirror

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to Glass and Sheet Metal Handling Warning . Preliminary Procedure Remove the outside moisture sensor covers to view the base to mounting pad support screw. Refer to Windshield Outside Moisture Sensor Cover Replacement (Encore)Windshield Outside Moisture Sensor Cover Replacement (Trax) .
1	Inside Rearview Mirror Screw CAUTION: Refer to Fastener Caution . Procedure Disconnected the electrical connectors from the mirror. Adjust the mirror to the full upward position, loosen the screw at the base in order to remove the mirror from the base to mounting pad screw. Slide the mirror upward motion in order to remove. Tighten 2 N.m (18 lb in)
2	Inside Rearview Mirror

Callout

Component Name

WARNING:

Refer to Glass and Sheet Metal Handling Warning .

Preliminary Procedure Remove the outside moisture sensor covers to view the base to mounting pad support screw. Refer to Windshield Outside Moisture Sensor Cover Replacement (Encore)Windshield Outside Moisture Sensor Cover Replacement (Trax) .

Inside Rearview Mirror Screw

CAUTION:

Refer to Fastener Caution .

Procedure

Disconnected the electrical connectors from the mirror.
Adjust the mirror to the full upward position, loosen the screw at the base in order to remove the mirror from the base to mounting pad screw.
Slide the mirror upward motion in order to remove.

Tighten
2 N.m (18 lb in)

Inside Rearview Mirror