LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Encore Base, AWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Gear Outlet Pipe/Hose Replacement >> Removal Procedure

Removal Procedure

  1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  2. Remove the right front tire and wheel assembly. Tire and Wheel Removal and Installation
    3. Fig 1: Steering Gear Outlet Hose Clamp
    GM2809971Courtesy of GENERAL MOTORS COMPANY
  3. Power Steering Gear Outlet Hose Clamp 1 - Disengage
  4. Power Steering Gear Outlet Hose 2 @Power Steering Fluid Cooler - Remove
    5. Fig 2: Power Steering Gear Outlet Hose Bracket
    GM2809970Courtesy of GENERAL MOTORS COMPANY
  5. Remove the power steering gear outlet hose bracket bolt (1) and the plastic push pin (2) and separate the power steering gear inlet hose (3) from the drivetrain and front suspension frame.
    6. Fig 3: Power Steering Gear Inlet And Outlet Hoses
    GM2808015Courtesy of GENERAL MOTORS COMPANY
  6. Power Steering Gear Inlet and Outlet Hose Bolt 1 - Remove
  7. Power Steering Gear Inlet Hose 2 @Steering Gear - Remove
  8. Power Steering Gear Outlet Hose 3 @Steering Gear - Remove
  9. Power Steering Gear Inlet Hose Seal 4 - Remove

    DISCARD the seal.

  10. Power Steering Gear Outlet Hose Seal 4 - Remove

    DISCARD the seal.

  11. Remove the power steering gear inlet hose (2) from the vehicle.
scientia non olet · About LEMON Manuals