LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Encore Base, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LE2) >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection (without KL9) Battery Negative Cable Disconnection and Connection (with KL9) 
  2. Drive Belt - Remove Drive Belt Replacement
  3. Raise and support the vehicle. Lifting and Jacking the Vehicle
  4. Front Compartment Front Center Insulator - Remove Front Compartment Front Center Insulator Replacement
  5. Front Wheel Drive Shaft-Right Side<!-- Location --> - Remove Front Wheel Drive Shaft Replacement - Right Side
  6. Fig 1: Battery Positive Cable
    GM4169704Courtesy of GENERAL MOTORS COMPANY
  7. Generator Terminal Protective Boot (1) - Remove
  8. Generator Nut (2) - Remove
  9. Battery Positive Cable (3) - Remove
  10. Electrical Connector (4) - Disconnect
  11. Fig 2: Generator
    GM4169707Courtesy of GENERAL MOTORS COMPANY
  12. Generator Bolt - Remove (1)
  13. Generator Mounting Nut (2) - Remove
  14. Generator Mounting Stud (3) - Remove
  15. Generator (4) - Remove