LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Cascada Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Object Detection System) >> Diagnostic Information and Procedures >> Rear Vision Camera System Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that DTC B2545 is not set.
    • If the DTC is not set 
  3. Verify there is no debris on the rearview camera lens and that the bezel and bezel seal are not damaged.
    • If debris are found on the lens 

      Clean the lens. If the lens, bezel or bezel seal are damaged, replace as necessary.

    • If no debris on the lens 
  4. Engine running, transmission in REVERSE.
  5. Verify the backup lamps are On.
    • If the backup lamps are ON 
  6. Engine running, transmission in REVERSE.
  7. Verify a clear rear vision image is displayed on the radio.
    • If a clear image is not displayed 

      Refer to Circuit/System Testing.

    • If a clear image is displayed 
  8. All OK.
scientia non olet · About LEMON Manuals