Inside Rearview Mirror Replacement

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inside Rearview Mirror

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the inside rearview mirror cover if equipped. Refer to Inside Rearview Mirror Wiring Harness Cover Replacement .
1	Inside Rearview Mirror CAUTION: Refer to Fastener Caution . Procedure Disconnect the electrical connector, if equipped. Adjust the mirror to the full upward position. Loosen the set screw located at the base of the mirror. Slide the mirror upward off of the rearview mirror button. Refer to Control Module References for programming and setup information. Tighten 2 N.m (18 lb in)

Callout

Component Name

Preliminary Procedure
Remove the inside rearview mirror cover if equipped. Refer to Inside Rearview Mirror Wiring Harness Cover Replacement .

Inside Rearview Mirror

CAUTION: Refer to Fastener Caution .

Procedure

Disconnect the electrical connector, if equipped.
Adjust the mirror to the full upward position.
Loosen the set screw located at the base of the mirror.
Slide the mirror upward off of the rearview mirror button.
Refer to Control Module References for programming and setup information.

Tighten
2 N.m (18 lb in)