LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Cascada Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: Rear Engine Lift Bracket Bolts
    GM2918366Courtesy of GENERAL MOTORS COMPANY
  2. Remove the 2 rear engine lift bracket bolts (2).
  3. Hang the rear engine lift bracket (1) aside to gain access to remove the generator.
  4. If equipped, remove the engine shield. Refer to Engine Shield Replacement .
  5. Remove the drive belt. Refer to Drive Belt Replacement .
    6. Fig 2: Generator Wiring Harness Plug
    GM2918363Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the generator wiring harness plug (3).
  7. Remove the generator positive cable nut (1) along with the generator positive cable (2).
    8. Fig 3: Generator Bolts
    GM2918364Courtesy of GENERAL MOTORS COMPANY
  8. Remove the 2 lower generator bolts (3).
  9. Lower the vehicle.
  10. Remove the upper generator bolt (1).
  11. Remove the generator (2).
scientia non olet · About LEMON Manuals