Circuit/System Verification
- Ignition ON.
- Verify that DTC B1405 is not set.
- If the DTC is set
Refer to DTC B1405 (with rear park assist, UD7) DTC B1405 (with advanced park assist, UDP, UDF)
- If the DTC is not set
- If the DTC is set
- Verify that DTC B095B 01 or B095C 01 is not set.
- If the DTC is set
- Check the appropriate Sensor for contamination from snow, mud, dirt, slush or ice.
- If contaminated, clean sensor.
- If there is no contamination
- Refer to Circuit/System Testing.
- If the DTC not set
- Verify that DTC B095B 3A or B095C 3A is not set.
- If the DTC is set
Replace the appropriate sensor with a sensor by correct sensor type.
- If the DTC is not set
- If the DTC is set
- Verify that DTC B095B 21 or B095C 21 is not set.
- If the DTC is set
Check the appropriate sensor for contamination with mud, ice or snow. If no contamination is diagnosed, replace the affected B166 Advance Parking Assist Side Object Sensor.
- If the DTC is not set
- If the DTC is set
- All OK.