LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Cascada Base >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System And Pedestrian Protection System >> Diagnostic Information and Procedures >> DTC B095B or B095C: Parking Assist Front Sensor >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify that DTC B1405 is not set.
    • If the DTC is not set 
  3. Verify that DTC B095B 01 or B095C 01 is not set.
    • If the DTC is set 
    1. Check the appropriate Sensor for contamination from snow, mud, dirt, slush or ice.
      • If contaminated, clean sensor.
      • If there is no contamination
    2. Refer to Circuit/System Testing.
    • If the DTC not set 
  4. Verify that DTC B095B 3A or B095C 3A is not set.
    • If the DTC is set 

      Replace the appropriate sensor with a sensor by correct sensor type.

    • If the DTC is not set 
  5. Verify that DTC B095B 21 or B095C 21 is not set.
    • If the DTC is set 

      Check the appropriate sensor for contamination with mud, ice or snow. If no contamination is diagnosed, replace the affected B166 Advance Parking Assist Side Object Sensor.

    • If the DTC is not set 
  6. All OK.