Component Testing
WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
Output Control Test
- Ignition ON, command the Windshield Washer Relay Command On and OFF with a scan tool.
- Observe the KR11 windshield washer pump relay activates and the G24 windshield washer pump runs.
- If the KR11 windshield washer pump relay does not work, replace the X50A fuse block - underhood.
- If the KR11 windshield washer pump relay works but the G24 windshield washer pump does not work, test the KR6 rear window washer pump relay and the G24 windshield washer pump.