LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2014 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Antilock Brake System) >> Repair Instructions >> Rear Wheel Speed Sensor Replacement (Disc Brake) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement .
    2. Fig 1: Wheel Speed Sensor And Wheel Speed Sensor Screw
    GM2028189Courtesy of GENERAL MOTORS COMPANY
  2. Remove the wheel speed sensor screw (2) from the steering knuckle.
  3. Remove the wheel speed sensor (1).
  4. Remove the wiring harness (3) from the bracket (4).
    5. Fig 2: Wheel Speed Sensor Wiring Harness
    GM2189141Courtesy of GENERAL MOTORS COMPANY
  5. Remove the wiring harness (2) retainers (3) from the brake hose (4).
  6. Remove the wiring harness (2) from the body retainer (1).
  7. Replace the body retainer (1).
    8. Fig 3: View Of Wheel Speed Sensor Electrical Connector
    GM2028202Courtesy of GENERAL MOTORS COMPANY
  8. Disconnect the electrical connector (1).
  9. Remove wheel speed sensor from the vehicle.
scientia non olet · About LEMON Manuals