LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2014 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the A/C compressor and condenser hose from the compressor and reposition. Refer to Air Conditioning Compressor and Condenser Hose Replacement .
  3. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  4. Remove the brake booster vacuum hose from the intake manifold and reposition.
    5. Fig 1: Engine Coolant Fan & Components
    GM2652293Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the engine coolant fan resistor wiring harness plug (2).
  6. Unclip the engine coolant fan wiring harness (6) from the 7 wiring harness clips (1, 5, 7). Hang the engine coolant fan wiring harness aside.
    7. Fig 2: Engine Coolant Fan Shroud & Mounting Points
    GM2652294Courtesy of GENERAL MOTORS COMPANY
  7. Unclip the engine coolant fan shroud (1) at the 4 mounting points (2).
    8. NOTE:

    Push the engine coolant fan to the right side.

  8. Remove the engine coolant fan shroud in top direction from the radiator.
    9. Fig 3: Engine Coolant Fan, Resistor & Mounting Components
    GM2512588Courtesy of GENERAL MOTORS COMPANY
  9. Unclip the engine coolant fan resistor (3) from the engine coolant fan shroud (2).
  10. Unclip the coolant fan wiring harness from the engine coolant fan shroud clips (4).
  11. Remove the 3 engine coolant fan motor bolts (1).
  12. Remove the engine coolant fan (5) along with the engine coolant fan motor.
scientia non olet · About LEMON Manuals